Real object

1.Carve the model must at night

2. Two month before starting the carving, the craver has imitated J. R. R. Tolkien’s manuscript time after time.

3.In carving

4.Those typical pentacles and plum blossoms on the manuscript have been lively craved onto the model.

5.A clearer picture of the model.

6.Raw material : Copper particles(can also use the 18k-gold particles)

7.Heat the particles with high temperature to get completely melted,and add some additive agent to remove those impurities and injurant.

8.Before the material is melted to the designed temperature, take out the specially made container from high temperature cabinet,which has been in the cabinet for more than 10 hours melting process,and the carved model has also been completely melted.

9.Put the container into a casting machine.

10.The container has been secured in the casting machine.

11.Pour the metal pieces that have been high-temperature melted into the container.

12.When the melted metal pieces are poured into the container,the casting machine will produce a strong suction for the entrance of metal pieces.

13.The metal temperature is very high bearing a color of white.

14.Naturally cooling…

15.Put the container into water immediately as to remove embed material.

16.A lot of burr is left on the surface of metal piece after coming out from the container.

17.The character made beforehand can be obviously seen now.

18.Manually use a file to remove the burr.

19.Be patient when polishing the ring surface.

20.Grind the ring with rubber wheel device.

21.More carefully to grind it, the longer time it will take.

22.Final polishing is made by the rag wheel device.

23.After all the above ,then comes the real One Ring.

24.The whole procedure needs about 20 days.

One Ring to rule them all, One Ring to find them, One Ring to bring them all and in the darkness bind them.






You may also interested in these articles :

One Comment
Amazing~~~
[Reply]
Incoming Links
Leave a Reply